Fixing the appliance into the housing unit
IMPORTANT: NO OTHER METHODS OF INSTALLING THE
MICROWAVE ARE SANCTIONED BY BAUMATIC.
o Fully insert the appliance into the aperture hole and centre it.
o Ensure that none of the cables are kinked or compressed when
the appliance is in position.
o Screw the appliance to the aperture using the fixing screws.
o The gap between the housing unit and the appliance must not be
closed by additional plinths.
o WARNING: The microwave will get hot during operation;
care should be taken not to accidentally come into contact
with the outer surface.
o WARNING: Children should not be allowed near to the
appliance unsupervised.
33
To Next Page
Loading...
