Adjusting the audible signal
o The audible signal has three different settings, low, medium and
high.
o To adjust the level of the audible signal, make sure that the
timer is in manual mode. Then press and hold the minus button
and you will hear the current level that is set.
o Press the minus button again and the audible signal will adjust to
the next level.
o When the required level of audible signal is reached, release the
minus button and it will be set.
Selecting a cooking function and temperature
Selecting manual operation mode
After your appliance is connected to your mains supply for the first
time, the numbers on the timer display will flash. Before you can select
a cooking function or set a temperature, you must set the appliance
into “manual operation” mode.
o To select manual operation mode, press the manual operation
button (9) on the control panel.
Selecting an oven function
o The oven function selector knob
should be used to select the particular
mode of cooking that you require. The
appliance will utilise different elements
within the oven cavity, depending on
the oven function that you select.
When a function is selected, the power
indicator light will come on.
Oven functions
CONVENTIONAL OVEN (top and lower element): This method
of cooking provides traditional cooking, with heat from the top and
lower elements. This function is suitable for roasting and baking on
one shelf only.
0
To Next Page
Loading...
