Installing your fridge freezer
If you need the appliance door to open from the
other side, then please reverse the door before
commencing the installation process. (See Reversing
the door section).
23
5) Cut the sealing strip so that is the same height as the height of the
4) Insert the top fixing bar
(a) into the slot on the top of
the appliance. Use the Ø4.2 x
9.5 fixing screws (f) to fit the
fixing bar to the top of the
appliance.
o Pass the power
cable through to the
back of the
aperture. This will
allow the appliance
to be easily plugged
in, once you have
completed the rest
of the installation.
aperture.
o Stick the sealing strip onto the
side of the aperture that the
appliance door will open from.
o Carefully lift the appliance and
place it into the aperture of the
kitchen unit that you are
installing it into.
o Slide the appliance over to the far left of the aperture, unless
you have reversed the door. In which case you should slide
the appliance over to the far right of the aperture.
To Next Page
Loading...
