26
o Using a pencil, mark where the edge of the appliance door meets
o From the edge of the furniture door, using a pencil you should
o Fix the door slide (c) to the furniture door using the Ø4 x 17
ith
b) Insert the door guides (d) into the door slides (c) and using the
o Close the furniture door and appliance door until they are almost
with the furniture door.
mark a distance, which is the thickness of the cabinet wall + 10
mm. This is where the edge of the door slide (c) should be
placed, in line with the door guide (d).
fixing screws (e). The outer edge of the door slide should be
placed on the second pencil mark that you made and in line w
the door guide.
9
Ø4.2 x 9.5 fixing screws (f), secure the door guides (d) to the
appliance door, through the predrilled hole.
fully shut. In this position the door guide (d) should not come
past the outer edge of the door slide (c). If it does, then your
door slide is too close to the edge of your furniture door and
should be moved further in.
To Next Page
Loading...
