o If the thermostat dials are set to a higher setting
(shown opposite), your fridge and freezer sections
will work harder to maintain a lower temperature.
There is no need to run your appliance on the higher
settings and the dials should be set in the position
shown on the previous page.
o IMPORTANT: If you run the appliance with the thermostat dials
on a higher setting for prolonged periods, the defrost drain hole
will freeze. It may also cause the appliance to overwork and the
fridge and freezer sections to freeze over.
Switching on the appliance and setting the thermostat
(BRB2616)
You switch on your appliance by connecting it to your mains supply
and setting the thermostat. The thermostat is located on the upper
right hand side of the inside of the cabinet, next to the interior light.
o The thermostat automatically regulates the temperature inside
the fridge freezer, depending on what number you have turned
the thermostat control knob to.
o Position <0> means that the appliance will not cool. However
the light will still function.
o Position <1> will give you a higher temperature inside the fridge
freezer.
o Position <7> will give you a lower temperature inside the fridge
freezer.
o Ideally the thermostat should be set to a position between <3>
and <4>.
o The fridge section can maintain a temperature of between 4 – 6
degrees centigrade.
o The freezer section can cool down to -18°C and lower.
15
To Next Page
Loading...
