Reversing the door swing
IMPORTANT: BEFORE COMMENCING THE DOOR REVERSAL
PROCESS THE APPLIANCE MUST BE DISCONNECTED FROM
YOUR MAINS SUPPLY.
o We suggest that two people complete the door reversal process.
o We recommend that the door reversal process is done before the
appliance is placed in its final position.
o Retain all screws, caps and accessories that you remove for later
use.
To change the door opening direction, please follow the instructions
below:
1) Switch off the appliance and unplug it. Remove all contents and
shelving.
2) Tilt the appliance backwards by no more than 45°. You may find
it easier to lay the appliance on its back, however you will need
to let the appliance stand for 6 hours before turning it on should
you do this.
3) Remove the feet from the bottom of the appliance and then
remove the lower hinge by unscrewing the 6 securing screws.
4) Pull the door downwards towards the bottom of the appliance,
releasing the top of the door from the top hinge-pin.
18
To Next Page
Loading...
