Connecting to external ducting
8) Connect the coupling to the top of the cooker hood, and then
connect a 125 mm ducting hose to the coupling (please note that
19
the ducting hose is not supplied with the appliance).
. It should
have a cross section of at least 150 cm².
e
gree bend.
Fit
9) Take the two chimney
ctions (C and D).
on the
top of the hood. You
he
o
oth
sides of chimney section C
a pencil.
o The other end of the ducting hose should be connected to a
discharge outlet that is suitable for cooking vapours
o The maximum distance between the coupling and your discharg
outlet should be 3 metres, with one 90 de
ting the chimney
se
o Rest the bottom of
chimney section C
should take care to
position the tabs on the
chimney section into t
rear of the hood.
Mark the side
measurement of b
on the wall with
To Next Page
Loading...
