Baumatic BTC6720 - Troubleshooting

23
roubleshooting
MPORTANT: If your cooker hood appears not to be operating
tacting the Baumatic Service Department,
lease refer to the checklist below.
e e electricity supply
o Check that the fan speed control is set correctly.
e
o The grease filters are dirty and require cleaning.
If the hood is set up for recirculation mode, check that the
ting
cked.
ring operation.
e
o Turn off the hob and then wait for the safety cut-out device to
ety cut-out device will frequently trip. Your cooker hood
ged if the safety cut-out device is tripped
T
I
properly, before con
p
My cooker hood will not start.
o Ch ck that the hood is connected to th
My cooker hood is not working effectively.
o Th fan speed is not set high enough
o The kitchen is not well ventilated enough.
o
carbon filters do not need replacing.
o If the hood is set up for extraction mode, check that the duc
hose and discharge outlet are not blo
My cooker hood has switched off du
o Th safety cut-out device has been tripped.
reset.
o IMPORTANT: If you have installed your cooker hood too low,
the saf
may become dama
frequently.