Built under installation for your microwave.
It is possible to build your microwave under a worktop;
however the following installation MUST be followed:-
1. The rear wall of the housing unit MUST be removed to allow
there to be the correct amount of ventilation.
2. The ventilation gaps below the support shelf and below the
worktop MUST be adhered to.
3. The appropriate Baumatic Microwave Building In Kit MUST be
fitted.
4. An induction hob MUST NOT be fitted above the microwave.
5. It is not necessary for there to be a storage drawer fitted
underneath the microwave; this is shown purely as an example
in the drawing on the preceding page.
6. WARNING: The microwave will get hot during operation;
care should be taken not to accidentally come into contact
with the outer surface.
7. WARNING: Children should not be allowed near to the
appliance unsupervised.
13
To Next Page
Loading...
