EasyManua.ls Logo

Baumatic BTM34SS - Memory Cook; Speedy Cook; Less, more

Baumatic BTM34SS
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
To alter cooking or defrosting time whilst oven is in operation, use Less or More.
Press Less/More button to decrease/increase the cooking or defrosting time in multiples of 1 minutes.
To overall cooking time can be increased to a maximum of 59 minutes.
LESS, MORE
If you often cook or reheat the same types of dishes, you can store the cooking times and functions in the oven's
memory, so that you do not have to reset them each time.
You can store one cooking.
MEMORY COOK
To set memory
1. Set your cooking programme as usual.
( except for auto defrost, cakes, crusty and auto cook function )
2. Touch Memory button.
The oven will beep and " : 0" or clock appears in the display.
Your settings are now stored in the oven's memory.
To store different settings simply repeat setting procedure.
To use memory
1. Touch Memory button.
Storing settings in the oven's memory appears in the display.
2. Touch START/SPEEDY COOK button.
The oven light comes on and the turntable starts rotating.
Cooking starts and the time in the display will count down.
More Less Clock Language
Memory Cake Crusty Auto Cook
More Less Clock Language
Memory Cake
M/W
Crusty Auto Cook
STOP/CLEAR
START/
SPEEDY COOK
1000W
E
Set your cooking programme......................
The speedy cook function allows the oven to begin cooking immediately on full power 1000W.
The speedy cook button has been pre-programmed to increase in increments of 30 seconds up to a maximum time of 5 minutes.
SPEEDY COOK
1. Touch STOP/CLEAR button.
": 0" or clock appears in the display.
2. Touch START/SPEEDY COOK button once.
MICROWAVE indicator lights up and the oven begins to operate immediately.
The oven light comes on and the turntable starts rotating.
STOP/CLEAR
START/
SPEEDY COOK
1000W
STOP/CLEAR
START/
SPEEDY COOK
1000W
Note :
When there's no memory key setting, "DATA EMPTY SELECT FUNCTION"
will be displayed.
BTM34(¿ )-1B4K0S 02.5.21 2:29 PM ˘`24

Related product manuals