Installing your freezer
If you need the appliance door to open from the
other side, then please reverse the door before
commencing the installation process. (See Reversing
the door section).
4) Insert the top fixing bar
(a) into the slot on the top
of the appliance. Use the
Ø4.2 x 9.5 fixing screws (f)
to fit the fixing bar to the
top of the appliance.
o Pass the power
cable through to
the back of the
aperture. This will
allow the
appliance to be
easily plugged in,
once you have
completed the rest
of the installation.
5) Cut the sealing strip so that is the
same height as the height of the
aperture.
o Stick the sealing strip onto
the side of the aperture that
the appliance door will open
from.
o Carefully lift the appliance
and place it into the
aperture of the kitchen unit
that you are installing it
into.
To Next Page
Loading...
