What to do if my Baumatic Wine Cooler does not operate?
If your Baumatic Wine Cooler isn't operating, start by checking if it's properly plugged into the power outlet. Also, inspect the circuit breaker to see if it has tripped. If it has, reset it. Lastly, check the fuse and replace it if it's blown.
Why is moisture forming on the outside of my Baumatic BW38BL Wine Cooler?
If moisture is forming on the outside of your Baumatic Wine Cooler, it's likely due to the door being slightly open, which allows cold air from inside the appliance to meet warm, moist air from the outside. Make sure the door is closed properly to prevent this.
Why is the temperature inside my Baumatic BW38BL too warm?
If the temperature inside your Baumatic Wine Cooler is too warm, there are several possible causes: * The temperature controls may be set too warm. Try setting them to a cooler setting and allow several hours for the temperature to stabilize. * The door may be kept open too long or opened too frequently, letting warm air in. Try to open the door less frequently. * The door might not be closed completely. Ensure it is fully closed. * The door gasket might not be sealing correctly. Check the door gasket for proper sealing. * The appliance may have recently been disconnected from the mains supply. Allow at least four hours for it to get down to temperature again.
Why is the temperature inside my Baumatic BW38BL too cold?
If the temperature inside your Baumatic Wine Cooler is too cold, it's likely that the temperature controls are set too cold. To fix this, set the temperature controls to a warmer setting and allow several hours for the temperature to stabilise.
What does 'LO' mean on my Baumatic Wine Cooler display and how to fix it?
If you see 'LO' on the LED display of your Baumatic Wine Cooler, it means the temperature inside the appliance is too low. To fix this, use the temperature increase button to adjust the temperature.
What does 'HL' mean on my Baumatic BW38BL display and how do I fix it?
If you see 'HL' on the LED display of your Baumatic Wine Cooler, it indicates that the temperature of the appliance is set too high. Use the temperature decrease button to adjust it.
Why is moisture forming on the inside of my Baumatic BW38BL?
If moisture is forming inside your Baumatic Wine Cooler, several factors could be the cause: * The door might be slightly open. Open the door less often. * The door might be kept open too long or opened too frequently. Open the door less often. * The door might not be sealed properly. Check the door seal for proper sealing.
How to stop my Baumatic BW38BL from vibrating?
To address vibration issues with your Baumatic Wine Cooler: * First, make sure the appliance is placed on a level surface. * Second, check if the appliance is touching the back wall. If it is, reposition it to create some space.
Details on the intended use of the appliance and warnings against modifications.
Instructions for checking the appliance for transport damage before connecting.
Guidelines and warnings related to child safety around the appliance.
Instructions for powering on and adjusting the temperature settings.
Detailed instructions for connecting the appliance to the mains supply.
Guidelines for selecting a suitable location and placing the appliance.
Possible causes and solutions for the appliance not working.
Troubleshooting steps for incorrect internal temperatures.
Identifying and resolving issues related to appliance vibration.
Causes and solutions for moisture inside or outside the appliance.
Interpreting abnormal displays on the control panel.
Instructions on when and how to contact customer support for assistance.
General| Type | Wine Cooler |
|---|---|
| Capacity | 38 bottles |
| Cooling System | Thermoelectric |
| Number of Shelves | 6 |
| Energy Rating | A |
| Installation | Freestanding |
| Colour | Black |
| Energy Efficiency Class | A |
| Noise Level | 38 dB |
| Shelves | Wooden |
| Door Material | Glass |
| Reversible Door | No |
| Climate Class | N |
| Temperature Range | 5-18°C |
To Next Page
