Using your cooker hood
Before first use
IMPORTANT: THIS PROCESS MUST BE FOLLOWED
BEFORE THE COOKER HOOD IS USED FOR THE FIRST
TIME.
o You should use a good quality stainless steel cleaner on ALL of
the stainless steel areas of your cooker hood, before it is used
for the first time.
o This will help to leave a silicone water-resistant film to protect
the stainless steel surfaces.
o Make sure that it has been installed by a suitably qualified
person, as per the information contained in the manufacturer’s
installation instructions.
o Find the control panel, which is located in the centre of the
canopy.
o There are several buttons on the control panel, which perform
separate functions.
To use your cooker hood
o Make sure that it has been installed by a suitably qualified
person, as per the information contained in the manufacturer’s
installation instructions.
o Find the control panel, which is located at the front of the
canopy.
o There are several buttons on the control panel, which perform
separate functions.
10
To Next Page
Loading...
