Using your Baumatic cooker hood
Before first use
IMPORTANT: THIS PROCESS MUST BE FOLLOWED
BEFORE THE COOKER HOOD IS USED FOR THE FIRST
TIME.
o You should use a good quality stainless steel cleaner on ALL of
the stainless steel areas of your cooker hood, before it is used
for the first time.
o This will help to leave a silicone water-resistant film to protect
the stainless steel surfaces.
To use your cooker hood
o Make sure that it has been installed by a suitably qualified
person, as per the information contained in Baumatic’s
installation instructions.
o Find the control panel, which is located at the front right of the
canopy.
o There are two sliders on the control panel, which perform
separate functions.
1) Light control. The light can be used even when the motor is
OFF.
0 = Light OFF
1 = Light ON
2) Motor speed control.
= Low speed
= Medium speed
To Next Page
Loading...
