EasyManua.ls Logo

Baumatic TG1 - Replacing the oven bulb

Baumatic TG1
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Removable oven roof liner
o Your appliance is supplied with a roof liner, which should be slid
over the top of the grill element.
o Once you have finished cooking, the liner should be removed
and thoroughly cleaned after each use of the appliance.
o Do not allow fat and grease to build up on the oven liner, as this
could cause a fire hazard.
Replacing the oven bulb
IMPORTANT: The oven must be disconnected from
your mains supply before you attempt to either
remove or replace the oven bulb.
o Remove all oven shelves, the drip tray and the side rack that is
on the same side as the oven light.
o Using a screwdriver, remove the lamp cover.
o Unscrew the bulb clockwise and remove it from its holder.
o Replace the bulb with a 25 W/300°C, screw type pigmy.
o Do not use any other type of bulb.
o Place the lamp cover back into position. There is a curve on one
side of the cover; this should be on the right hand side as the
cover goes back into place.
19

Other manuals for Baumatic TG1

Related product manuals