Reversing the door of your appliance
IMPORTANT: This operation must be only carried out
by a suitably qualified person. Baumatic Ltd. do not
recommend that a customer completes this operation.
o It is necessary to disconnect the oven from the mains
before executing the operations described in the present
manual.
o Please read this text thoroughly before starting with the
work.
o Once that the operations are completed, ensure that the
oven is re-assembled properly and check the electric
connection.
o In order to reverse the door it is necessary to remove the covers
of the Oven. Therefore if the appliance is already installed,
loosen the screws which fixed the oven to the cabinet and
extract it from the unit.
1) Loosen the screws and remove the
upper cover of the oven
21
2) Loosen the screws that fix the
control panel. These can be found
o On the stainless steel sides
of the oven.
o On the base of the control
panel (where the ventilation
slots are cut out).
To Next Page
Loading...
