Baumer EXG - 7 Notes And Instructions; Warranty Notes; Lens Mounting

36
NotesandInstructions7.
WarrantyNotes7.1.
Keepcamerahousingclosed
There are no adjustable parts inside the camera!
In order to avoid the loss of warranty do not open the housing!
Dismantling/Rework/RepairofBaumerCameras
If it is obvious that the device is / was dismantled, reworked or re-
paired by other than Baumer technicians, Baumer Optronic will not
take any responsibility for the subsequent performance and quality
of the device!
LensMounting7.2.
AvoidDustonSensorandLens
Avoid contamination of the sensor and the lens by dust and airborn
particles when mounting a lens to the device!
Therefore the following points are very important:
Attach lenses in an environment that is as dust free as possible! ▪
Keep the dust covers on camera and lens as long as possible! ▪
Hold the camera downwards with unprotected sensor (or lter- / ▪
cover glass)!
Avoid contact with any optical surface of the camera or lens! ▪