Baumuller BUM 62 T - Application as Directed; Voltage Test

Safety notes
Mono Power Unit BUM 62 T 9
Baumüller Nürnberg GmbH 5.99009.03
Application as directed
Voltage test
BAUMÜLLER carries out a voltage test according to EN 50178 / VDE 0160 /11.94, Section 9.4.5 for
each unit.
Subsequent high-voltage tests must only be carried out by BAUMÜLLER NÜRNBERG GmbH.
WARNING
You may only use the unit/system for the purposes specified in the operating instructions and in
conjunction with the third-party equipment and components recommended or authorised by
BAUMÜLLER NÜRNBERG GmbH.
For safety reasons, you must not change or add components on/to the unit. The operator must report
immediately any changes that occur which adversely affect the safety of the unit/system.
WARNING
If you want to carry out high-voltage tests for complete switch cabinet installations, disconnect all
cables from BAUMÜLLER units prior to the test.