TAM 00624 22
DS 100 – 200 03 / 2005
Three-phase synchronous motor, air-cooled English
Warranty and liability
All the details in this documentation are unbinding customer information and subject to ongoing
change and will be continuously updated by our permanent editing staff. Warranty and liability
claims against Baumüller Nürnberg GmbH are excluded if, in particular, the damage is caused by
one or more of the following:
- You have not followed the instructions in this documentation.
- You have not used the system for the purpose intended.
- You have
• mounted, installed, commissioned, operated the system incorrectly or have
not carried out the required maintenance
• permitted the system to be mounted, installed, operated and/or maintained
by unqualified or insufficiently qualified personnel,
• overloaded the system,
• operated the unit with
- faulty safety devices,
- safety devices that were incorrectly fitted or not fitted
- safety devices or protective devices not in proper working order,
• not operated the system in the stipulated ambient conditions.
- You have modified the system without the written approval of Baumüller Nürnberg GmbH.
- You have not observed the instructions concerning maintenance in the component
descriptions.
- You have not monitored parts subject to wear sufficiently.
- You have made a repair incorrectly.
- You have combined the system with the products from other manufacturers in an improper
manner.
- You have combined the drive system with faulty and/or incorrectly documented products
from another manufacturer.
The “General Terms and Conditions of Sale“ Version 1.1 of 15 February 2002 or the latest version
drawn up by Baumüller Nürnberg GmbH always apply.
These are available to you, at latest, on the conclusion of the contract.
To Next Page
Loading...
Need help?
General
