Baur PD-SGS User Manual

For your safety PD-SGS
8
/ 46 822-162-1
All BAUR devices and systems are reliable and are manufactured as per state-of-the-art
technology. The individual parts and the finished devices are subject to continuous testing by
our qualified personnel as part of our quality assurance system. Each device is fully tested
before delivery.
However, the operational safety and reliability in practice can be achieved only when all
necessary measures have been taken. The responsible body
1
and operator
2
of the device or
system are responsible for planning these measures and monitoring their implementation.
Before operating the device or system you should read and understand this user manual and
the user manuals of all integrated devices.
2.1 Instructions for the user
The product may be operated only by authorised and trained electrical engineers. An
electrical engineer is a person who owing to his professional education (electrical
engineering), knowledge, experience and acquaintance with the applicable standards and
regulations can assess the tasks assigned to him and detect possible dangers.
In addition, the user must have:
 Knowledge of the technical equipment and operation of the PD-SGS
 Knowledge of the testing and measurement procedures
 Knowledge of plant engineering (cable types, switchgear, etc.).
2.2 Intended use
The BAUR handheld online PD detector PD-SGS is used to conduct rapid initial tests for PD
activities on live switchgear.
If the device is used without observing this condition, safe operation cannot be guaranteed.
The operator or user is liable for any damage to persons and property resulting from
incorrect operation.
Proper use also includes
 Compliance with all instructions in this user manual,
 Compliance with the technical data and connection requirements given on the rating
plate and in the user manual,
 Compliance with the inspection and maintenance tasks.
1
Responsible body is the person or group that is responsible for the safe operation of the device and its
maintenance (EN 61010, 3.5.12).
2
Operator is the person who uses the device for its intended purpose (according to the definition of user in
compliance with EN 61010, 3.5.11).
2 F
OR YOUR SAFETY

Baur PD-SGS Specifications

General

Brand	Baur
Model	PD-SGS
Category	Security Sensors
Language	English