EasyManua.ls Logo

Baxi HP40 - Important Warranty Information; Warranty Terms and Conditions

Baxi HP40
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Important information
about your warranty
Please read the following pages very carefully as
they contain key information about your warranty.
Your Baxi HP40 Air Source Heat Pump comes with a 2 year
warranty as standard.
There is an extended 5 year parts and labour warranty*
available, for this to be redeemable please make sure the
following steps have been completed.
1. The magnetic filter that comes with your ASHP must be
installed. If it is not installed or is removed, your warranty
will revert to two years.
2. Your installer has arranged for your ASHP to be
commissioned correctly*.
3. Ensure your installer has completed the Benchmark
checklist. We recommend this is done digitally using the
Benchmark app.
4. Your installer must register your warranty within 30 days
of commissioning. Your warranty will start on the date
your ASHP was commissioned.
5. Your ASHP and its filter must be serviced annually within
60 days of the anniversary of the commissioning date.
This must be done in accordance with the procedure set
out in the installation and maintenance manual.
It is your responsibility as the appliance owner to
ensure that the requirements of the warranty terms
and conditions are met.
* Terms and condition apply. In the event of
non-compliance, your warranty will revert to a standard
2 years. For full terms and conditions, please visit:
baxi.co.uk/ASHPWarranty

Other manuals for Baxi HP40

Related product manuals