To Next PageTo Next Page
Need help?Do you have a question about the Baxi Solarflo and is the answer not in the manual?
Identifies the Solarflo™ as an Evacuated Tube Collector for domestic hot water.
Advises users to read instructions before installation and leave them for safe keeping.
Details what the installer should have explained regarding system function, controls, and maintenance.
Provides contact details for clarification or assistance regarding the system.
Explains the main component parts of the Baxi Solarflo System, including collectors and cylinder.
Discusses system settings, advising against alteration without expert consultation.
Outlines the four main menus for controller operation.
Explains the functions of the control buttons for navigating menus and selecting options.
Details the 'Info' menu for displaying measured values, system conditions, and error messages.
Lists various temperature indications and their reset possibilities.
Covers programmable parameters like storage temperature, hysteresis, and pump speed control.
Details specific settings such as start/stop times for circulation and clock settings.
Explains symbols for solar pump, output status, and system faults displayed on the controller.
Lists error representations, possible reasons, and advises contacting support for faults.
Instructs to switch off power and contact an engineer if fluid is discharged from the Pressure Relief Valve.
Explains integration with auxiliary heating and that the controller does not manage space heating.
Emphasizes the need for annual checks and servicing by a qualified solar engineer for continued operation.
Advises checking and potentially replacing solar thermal transfer fluid every two years.
States that descriptions and illustrations are subject to change without notice.
Provides Baxi's trading division, address, and technical enquiry contact information.
Identifies the Solarflo™ as an Evacuated Tube Collector for domestic hot water.
Advises users to read instructions before installation and leave them for safe keeping.
Details what the installer should have explained regarding system function, controls, and maintenance.
Provides contact details for clarification or assistance regarding the system.
Explains the main component parts of the Baxi Solarflo System, including collectors and cylinder.
Discusses system settings, advising against alteration without expert consultation.
Outlines the four main menus for controller operation.
Explains the functions of the control buttons for navigating menus and selecting options.
Details the 'Info' menu for displaying measured values, system conditions, and error messages.
Lists various temperature indications and their reset possibilities.
Covers programmable parameters like storage temperature, hysteresis, and pump speed control.
Details specific settings such as start/stop times for circulation and clock settings.
Explains symbols for solar pump, output status, and system faults displayed on the controller.
Lists error representations, possible reasons, and advises contacting support for faults.
Instructs to switch off power and contact an engineer if fluid is discharged from the Pressure Relief Valve.
Explains integration with auxiliary heating and that the controller does not manage space heating.
Emphasizes the need for annual checks and servicing by a qualified solar engineer for continued operation.
Advises checking and potentially replacing solar thermal transfer fluid every two years.
States that descriptions and illustrations are subject to change without notice.
Provides Baxi's trading division, address, and technical enquiry contact information.
General| Type | Flat plate |
|---|---|
| Insulation | Mineral wool |
| Maximum operating pressure | 10 bar |
| Glazing | Tempered glass |
| Frame material | Aluminium |
