Need help?Do you have a question about the Baxi Solo 2 PF and is the answer not in the manual?
General| Ignition | Electronic |
|---|---|
| Warranty | 2 Years |
| Boiler Type | Conventional |
| Fuel Type | Natural Gas |
| Central Heating Flow Temperature Range | 30°C to 80°C |
Describes the Baxi Solo 2 PF as a Wall Mounted Powered Flue Gas Fired Central Heating Unit.
Details the boiler's features, models, and heat outputs.
Outlines basic installation rules, regulations, and standards.
Highlights precautions regarding R.C.F. fibres and safe handling.
Lists detailed performance, dimensional, and electrical data for all models.
Covers system requirements, water quality, and flushing procedures.
Explains the necessity and configuration of bypass circuits.
Discusses site selection, clearances for access, and installation regulations.
Provides recommendations for positioning the flue terminal.
Steps for unpacking the boiler and preparing for installation.
Guides on positioning the boiler and cutting the rear flue opening.
Guides on marking wall positions and cutting holes for side flues.
Provides a schematic and warnings for electrical connections.
Details on connecting water pipes, thermostats, and pipe routing.
Covers system flushing, purging, and basic checks.
Focuses on setting burner pressure, gas soundness, and system balancing.
Provides a step-by-step guide to safely take apart the boiler.
Details on cleaning key internal components of the boiler.
Detailed instructions for replacing the central control board.
Step-by-step guide for replacing key electrical and gas components.
Instructions for replacing the fan, pressure switch, and burner components.
A visual guide to diagnosing and resolving common faults.
To Next Page
