Need help?Do you have a question about the BAYKON BX11 and is the answer not in the manual?
General| Touch Panel | Resistive |
|---|---|
| Display | TFT LCD |
| Ethernet | 10/100 |
| Operating Temperature | -10°C |
| Protection | IP65 |
| Touch Technology | Resistive |
| Processor | ARM Cortex-M3 |
Essential safety guidelines for operating and servicing the BX11 indicator.
General description of BX11 instruments for weighing and force measurements.
Detailed list of features and technical specifications for the BX11 family.
Explanation of the seven-segment LED display and indicator meanings.
Description of each key's function on the BX11 front panel.
How to activate and deactivate the keypad lock function to prevent unauthorized access.
Details on the BX11 housing type and panel mounting dimensions.
List of accessories supplied with the instrument and those sold separately.
Guidelines for control cabinet design, cabling, and electrical connections.
Instructions for physical mounting of the BX11 indicator.
Detailed instructions for various electrical connections like power, load cells, and interfaces.
Steps for initial setup and configuration of the BX11 indicator after installation.
Data structure for continuous serial data transmission from the BX11.
Format for fast continuous data output, suitable for high-speed communication.
Options for data output format when using the print mode.
Details on the standardized BAYKON Serial Interface (BSI) data format.
Procedure to access the programming and calibration menus on the BX11.
Steps for quick access to calibration parameters for service technicians.
How to exit programming mode and save or discard changes.
Detailed explanation of programming parameters for interface and data settings.
Configuration of analogue output modes, signal selection, and calibration.
How the analogue output signal relates to gross load and error conditions.
Details on data storage formats (High-Low, Low-High) for Modbus RTU.
Register map and command definitions for Modbus RTU communication.
Configuration of GSD files for Profibus DP masters interacting with BX11 PB.
Description of data structure for BX11 PB Profibus DP communication.
Configuration parameters for Profinet network setup using EtherX PC software.
GSDML configuration for Profinet programmers interacting with BX11 PN.
Data structure details for BX11 PN Profinet communication.
Configuration for Ethernet network and TCP/IP settings.
Data structures for Modbus TCP/IP communication over Ethernet.
EDS configuration for PLC programmers using BX11 CO CANopen.
Data structure details for BX11 CO CANopen communication.
To Next Page
