Bayliner 2859 Classic Cruiser User Manual

Provides boat dimensions and fluid capacities including fuel, freshwater, and waste holding.

Illustrates the interior layout of the boat, identifying key areas and features.

Information on contacting dealers for service, support, and parts.

Details Bayliner's limited warranty for new boats and how to obtain assistance.

Advice on gaining operating experience and information on safety classes.

Guidelines for engine/accessory installation and potential warranty impacts.

Specifies the load limit for the transom and bow platforms.

Critical safety warnings, hazard alerts, and essential safety instructions.

Emphasizes using qualified personnel for system maintenance and modifications.

Advice on hull care, barrier coating, and bottom paints for moored boats.

Explains the function, importance, and maintenance of zinc anodes.

Details on CO dangers, sources, symptoms, and factors affecting poisoning.

Situations causing CO accumulation and measures to protect occupants.

Trip, monthly, and annual checklists for CO safety and exhaust system checks.

Information on CO alarm operation, maintenance, and installation.

Contact details for safety organizations and resources.

Safe procedures and warnings for lifting the boat using slings or other methods.

Identification of exterior boat components and their locations.

Diagrams showing hull drains, vents, and fittings.

Labels for components located on the forward deck.

Labels for components on the aft deck and boat sides.

Identification of gauges, switches, and controls at the helm station.

Detailed list of component locations throughout the boat.

Reference to engine manuals and operation of the engine room ventilation system.

Warnings and diagrams concerning the boat's fuel system and safety.

Information on fuel fill/vent fittings, filters, and anti-siphon valve.

Procedure for draining engine oil using the quick drain system.

Details on steering system and warnings for shift/throttle hardware.

Information on the stern drive's power trim and tilt system.

Operation and warnings for using trim tabs to level the boat.

Information on VHF radio and depth finder usage and warnings.

Importance of compass accuracy, calibration, and deviation cards.

Information on automatic bilge pumps and their control switches.

Procedures for testing bilge pumps and their autofloat switches.

Operation of seacocks and maintenance of seawater strainers.

Warnings and operation of the potable freshwater system.

Warnings and operating instructions for the water heater.

Overview of deck, sink, and shower drainage systems.

Operation, winterizing, and maintenance of the marine head system.

Warnings regarding lifting the boat using cleats or tow eyes.

Information on the AC/DC refrigerator operation.

Safety warnings and operating procedures for the stove.

Instructions for converting the dinette area into a berth.

Common issues and maintenance for boat lights.

Warnings about obstructing navigation lights from view.

Power consumption and operation of cabin lights.

Safety and operational guidelines for the AC system, including seacock use.

Critical safety warnings for fire, shock, and explosion hazards.

Overview of batteries, fuses, circuit breakers, and the DC distribution panel.

Explanation of battery switch positions and their functions.

Role of the alternator and operation/precautions for the battery charger.

Usage and limitations of the 12V accessory outlet at the helm.

Information on the AC system, components, and the single shore power panel.

Critical warnings and procedures for connecting to shore power.

Details on shore power inlets, adapters, and dockside connections.

Step-by-step guide for connecting to shore power safely.

Operation of the transfer switch for dual shore power systems.

Diagrams showing electrical harness layouts for deck and hull.

Diagram illustrating the boat's battery system connections.

Wiring diagrams for single and dual dockside power connections.

Wiring diagram for the boat's engine electrical system.

Fields to record details about the selling dealer, engine, and electronics.

Sections to detail the boat, passengers, operator, and trip expectations.