Need help?Do you have a question about the Bayliner 288 Classic and is the answer not in the manual?
Specifies that only qualified personnel should service key systems.
Overview of safety standards and potential hazards on board.
Safe practices for lifting and handling the boat.
Information on CO dangers, symptoms, and prevention.
Steps to take to prevent carbon monoxide poisoning.
Locations of key electrical system parts like batteries, panels, and outlets.
Locates essential plumbing components such as pumps, tanks, and seacocks.
Basic information and guidelines for the boat's engine.
Information on the fuel system, including hazards and recommendations.
Details on the hydraulic steering system and its checks.
Information on the proper use and maintenance of shift/throttle controls.
Description of the boat's bilge pump system and its control.
Procedures for testing bilge pumps and clearing debris from the housing.
Information on seawater systems, seacock operation, and safety hazards.
Instructions for using and maintaining the boat's freshwater system.
Procedures for winterizing the freshwater system using air or gravity.
Critical safety warnings for operating the alcohol/electric stove.
Critical safety precautions for fire, shock, and explosion hazards.
Details on the 12-volt DC system, including batteries and switches.
Information on the 110-volt AC system, shore power, and panel usage.
Essential safety procedures for connecting to shore power sources.
To Next Page
General