6
Assembly Instructions
7. Place the table top (A) upside down on a level and protective surface as shown.
8. Flip the assembled base upside down and align the drilled holes on mounting boards (B) with the threaded
inserts on the slide supports on the table top (A). Insert eight bolts (AA) with lock washers (CC) and flat
washers (DD) through the drilled holes on the mounting boards (B) and then securely screw into the slide
supports, using the enclosed hex wrench.
9. Ask for assistance to lift the unit upright and position it at the desired location.
10. Cover the countersunk holes on the outer legs (C) by inserting the provided wood plugs (EE). Gently tap the
wood plugs (EE) with a rubber mallet to ensure they are fully seated.
To Next Page
Loading...
