Bazooka BPB24 User Manual

1.
3 .
4.
5.
6.
7.
8.
9.
10.
11.
12.
2.
Remove fuse from 6 ft power cable (12). Attach the red wire to the positive battery terminal. Attach the black wire
to the negative battery terminal. Run power cable to the location of the BPB24. making sure power wire does not
hinder the safe operation of the vehicle. Plug the red power cable end into the BPB24’s red input power plug. The
black 12vdc accessory plug can be used to power any 12vdc accessory up to 15 amps. Use the included black
accessory pigtail (11) to wire your accessories.
1. Party Bar (BPB24, BPB24-DS, or BPB36) 1 ea.
2. Optional Mounting Bolt 6mm 4 ea.
3. Mounting Leg 2 ea.
4. Rubber Vibration Insulation Pads 2 ea.
5. Socket Head Cap Screw 8mm X 12mm 2 ea.
6. Low Profile Socket Head Cap Screw 6mm X 12mm 2 ea.
7. Socket Head Cap Screw 6mm X 30mm 2 ea.
8. Narrow Washer 6mm 4 ea.
9. Nylon Insert Locking Nut 6mm 2 ea.
10. Stud 6mm x 40mm 2 ea.
11. Accessory Pigtail 1 ea.
12. Power Cable 6 ft. 1 ea.
IMPORTANT NOTICE:
The internal RF circuit for the remote control will draw a small amount of current because it must always be ON
listening for the remote commands. Over time this could draw down your battery when your machine remains in
storage without being connected to a charger or not being actively used. For this reason, we recommend
connecting the Party Bar to a switched master power source or disconnecting the main power wire when the
machine is in storage. We also make a plug & play inline 12v master power switch that can be easily added to the
main battery wire for the Party Bar to completely kill power to the unit. It is listed under the Accessories tab on the
Party Bar product page on our website (Model number: PR-ILS16)
Rev.12/12/2016 Pg. 1
BPB24 / BPB24-DS
BPB36
Installation Instructions

Bazooka BPB24 Specifications

General

Brand	Bazooka
Model	BPB24
Category	DJ Equipment
Language	English

Summary

Product Introduction and Initial Setup

Important Notice

Details crucial information regarding power draw and storage recommendations.

Power Cable Installation

Guidance on connecting the power cable to the battery and the unit.

User Interface and Connectivity

Button Operations

Details the functions and actions for each of the five control buttons.

Audio Port Specifications

Describes the Aux Input and Audio Output ports for audio connection.

Bluetooth Indicator Meanings

Explains the meaning of different audio responses and LED indicators from the Bluetooth module.

Functional Controls and Indicators

LED Status Indicator Guide

Provides a guide to understanding the meaning of different LED light statuses.

Music Playback Controls

Details how to control music playback, volume, and track selection.

LED Mode and Color Controls

Explains how to control LED modes, speed, and color.

Switch Functions and Usage Notes

Describes switch functions and provides important operational notes for the device.

Mounting Options

End Mounting with Cast Aluminum Legs

Instructions and warnings for attaching the unit using cast aluminum mounting legs.

Integrated Mounting Rail System

Guidance on using the integrated rail system and optional clamps for mounting.

Remote Pairing Procedure

Step-by-Step Pairing Instructions

Detailed steps for pairing the remote control with the main unit.