1. Long press the Mode button to turn
the Party Bar ON/OFF.
2. Long press the LED button to turn
the LED lights On/O. Click press the
LED button to cycle through stored
LED sequences.
3. ACC button turns ON/OFF the
accessory 12v pig tail for an external
LED light bar or other accessory.
4. Click press the Mode button to
toggle between Bluetooth/Aux/USB
listening modes.
5. Press >|| to Pause/Play music.
6. Press Vol +/- to raise and lower the
volume of the Party Bar.
7. Press |<< and >>| buttons to track
forward/reverse on songs.
Unleash the Sound and Illuminate Your Adventure
LED
Mode
(Change Music Mode)
Play/ Pause
Accessory
Volume up
Song reverse
Song forward
Volume down
Detailed instructions can be found at www.bazooka.com
To Next Page
Need help?
General
