Bazooka EL10A - User Manual

If you have any questions contact
the SAS Technical Support Department at:
Phone - (504) 272 7135  Fax - (504) 272-9844
Email - tech@sasbazooka.com  Website - www.sasbazooka.com
In Canada: (604) 988 2966
15049 Florida Blvd., Baton Rouge, LA. 70819
1003129702
amplified installation manual

Summary

Congratulations

System Features

Specifications

Installation

Truck Installation

Illustrates the placement of the Bazooka subwoofer in a truck.

Sedan Installation

Illustrates the placement of the Bazooka subwoofer in a sedan.

Hatchback Installation

Illustrates the placement of the Bazooka subwoofer in a hatchback.

Mounting the Bazooka

Wiring Diagram

Power Wire

Ground Wire

Remote Turn On Options

Option One

Connects Remote Turn On Wire to SAS On/Off Switch for versatility and demonstration.

Option Two

Connects Remote Turn On Wire to ignition/accessory via fuse block for automatic turn-on.

Option Three

Utilizes the built-in Auto Turn-On feature sensing music at inputs.

Input Signal Connections

High-Level Inputs

Connects GREEN/GRAY wires to source unit speaker outputs for high-level audio input.

Low-Level Input

Connects low-level RCA phono jack inputs to source unit using shielded patch cord.

Warranty

Bass Tubes Enclosure

Bazooka EL10A Specifications

General

Impedance	4 Ohms
Enclosure Type	Bass Reflex
Type	Active
Power Output (RMS)	100W
Peak Power	200W
Speaker/Driver Size	10 inches
Voice Coil	2 inches