Need help?Do you have a question about the BBE Audio Restoration System BBE ARS and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Manufacturer | BBE Sound Inc. |
| Inputs | 2 x RCA |
| Outputs | 2 x RCA |
| Frequency Response | 20Hz - 20kHz |
| Dimensions | 483mm x 44mm |
Covers CAUTION and WARNING notices regarding electric shock, fire, and moisture hazards.
Details the low frequency and BBE process adjustment knobs for both channels.
Describes the function of the Process, Tape, and Program selection switches.
Details the RCA jacks for connecting the main audio source.
Details the RCA jacks for connecting to tape decks or recorders.
Recommends connecting prior to the power amp output and proper cabling sequence.
Diagram and guide for connecting the BBE ARS into an integrated amp's tape loop.
Shows how to connect the BBE ARS with other processors in the signal chain.
Diagram for connecting between pre-amp and power amp outputs/inputs.
Guide for connecting the BBE ARS to a single audio component.
How to connect the BBE ARS with surround sound systems.
To Next Page
