Need help?Do you have a question about the BBE Sonic Maximizer BBE 882 and is the answer not in the manual?
General| Type | Sonic Maximizer |
|---|---|
| Model | BBE 882 |
| Channels | 2 |
| Signal to Noise Ratio | > 100 dB |
| Output Impedance | 600 Ohms |
| Inputs | 2 x 1/4" TRS |
| Outputs | 2 x 1/4" TRS |
| Frequency Response | 20Hz - 20kHz |
| Input Impedance | 10k ohms |
| Dimensions | 19" x 1.75" x 8.5" |
Details critical safety warnings, cautions, and explanations of warning symbols used in the manual.
Precautions regarding water, moisture, and heat sources during appliance installation.
Guidelines for connecting to power, cord protection, grounding, and general safe operation.
Instructions for unplugging the unit and when to seek qualified service personnel.
Overview of the BBE 882 as a dual-channel signal processor with key features.
Key points to remember regarding signal levels, impedance, and proper connection types.
Guidance on connecting the BBE 882 into the signal chain and recommended setup practices.
How the BBE 882 enhances clarity and intelligibility in live sound and DJ systems.
Benefits of using the BBE 882 with guitar, bass, and keyboard rack systems for improved tone.
Using the BBE 882 for individual tracks or overall mixdown in studios for enhanced sound.
Explanation of the LED display for monitoring output signal levels and clip indicators.
Function of the Lo Contour control for adjusting phase-corrected bass frequencies.
Function of the Process control for adjusting phase-corrected treble frequencies.
How the BBE Function switch allows comparison of processed vs. unprocessed sound.
Description of Channel B controls, mirroring those of Channel A.
Location and function of the primary power switch for the BBE 882.
Details on connecting the AC power cord to the unit and receptacle types.
Information on the fuse location, type, and replacement procedure.
Explanation of balanced XLR and 1/4" TRS phone jack outputs.
Explanation of balanced XLR and 1/4" TRS phone jack inputs.
Specifics for Channel A input and output connections, similar to Channel B.
Specifies frequency response in process and bypass modes.
Technical data on noise levels and total harmonic distortion.
Details on maximum output level, input/output impedance, and sensitivity.
Information on power requirements, fuse type, dimensions, and shipping weight.
Instructions for safely connecting and powering up the BBE 882 within an audio system.
Guidance on where to place the BBE 882 in the signal chain for various applications.
Discusses the relationship between the BBE processor and equalizers in a signal chain.
Diagram illustrating connection of the BBE 882 with a non-powered mixer in a live setup.
Diagrams showing BBE 882 integration with powered mixers, including insert points.
Diagrams for using the BBE 882 in recording studios and for mastering or dubbing tasks.
Diagram showing BBE 882 connection for individual instruments, like guitars and keyboards.
Diagrams illustrating use in sound contractor systems and DJ applications.
Guidelines for obtaining service, return authorization, and shipping the unit for repair.
Information on the five-year limited warranty, coverage, exclusions, and proof of purchase.
Recommendations for cleaning the BBE 882 chassis and front panel without opening it.
Steps for initial setup and testing the unit's power supply voltages.
Procedures for testing Process, Lo Contour controls, and the bypass function.
Steps to verify LED signal indicators and XLR input connection integrity.
Detailed schematic of the primary audio processing circuitry for Channel A.
Detailed schematic of the primary audio processing circuitry for Channel B.
Schematics for the output drivers and LED indicator circuits.
Diagram illustrating the power supply section and voltage regulation circuits.
To Next Page
