Need help?Do you have a question about the BBE SONIC MAXIMIZER 482 and is the answer not in the manual?
General| Type | Sonic Maximizer |
|---|---|
| Channels | 2 |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion (THD) | < 0.05% |
| Signal to Noise Ratio | > 100 dB |
| Process Controls | Lo Contour, Process |
| Bypass | Yes |
| Inputs | 2 x 1/4" TRS |
| Outputs | 2 x 1/4" TRS |
| Output Impedance | 600 ohms |
| Power Supply | 9V DC |
Connect only to the specified power supply type as indicated on the appliance.
Route cords to prevent damage from being walked on or pinched.
Unplug and consult qualified personnel for damage, liquid spills, or abnormal operation.
Explains how the BBE process corrects phase and amplitude distortion in audio signals.
Describes the unbalanced 1/4" Phone and RCA output jacks and their specifications.
Explains the unbalanced input connection via 1/4" Phone or RCA plugs.
Warns against connecting a power amp output directly to the BBE 482 input to prevent damage.
Discusses ideal placement for guitar, keyboard, P.A., and effects loops.
Explains two methods for integrating the BBE 482 with a powered mixer.
Diagram showing BBE 482 connection via effects loop or main output of a guitar preamp.
Procedures for obtaining return authorization for service.
Details the five-year warranty, coverage, exclusions, and liability limitations.
Guidance on cleaning, user serviceable parts, and calibration of the unit.
Steps to test the BBE Process and Lo Contour functions and output levels.
To Next Page
