EasyManua.ls Logo

BBE SONIC STOMP - Technical Specifications; Detailed Product Specifications

BBE SONIC STOMP
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPECIFICATIONS
10
Frequency Response: ……………………………………………Program Dependent
BBE: Lo Contour ………………………………………+12dB @ 50Hz
Process ……………………………………………+12dB @ 10kHz
Signal to Noise Ratio:
BBE on Max ………………………………………94dB
BBE on Min ………………………………………104dB
THD: ……………………………………………………0.02% at 1kHz
Noise: BBE on Max ………………………………………-87dBu
BBE on Min ………………………………………-97dBu
Max Signal Level ………………………………………………+7dBu
Input Impedance: ………………………………………………1MEG Ohms
Output Impedance:………………………………………………1K Ohm
* 0dBu = 0.775Vrms
Hardware Bypass ………………………………………………YES
Power Requirements:
DC inlet: …………………………………………+9VDC min. 200ma
Battery Life: ………………………………………15 hours
Dimensions: ………………………………...... ………………3.7
"
(W) x 4.7
"
(D) x 1.8
"
(H)
Shipping Weight: ………………………………………………3.3 lbs.
Note: Due to continuing product improvement, specifications and design are subject to change without notice.

Other manuals for BBE SONIC STOMP

Related product manuals