UPDATED LAST: March 2019
WWW.BBKPERFORMANCE.COM
BBK PERFORMANCE LLC
3060 Performance Circle
Deland, FL 32724
For any questions, email us:
TECH@BBKPERFORMANCE.COM
IMPORTANT: All appropriate safety equipment and gear must be used during the installation of this or any BBK Performance products or any time you work on a vehicle.
BBK Performance accepts no responsibility for injuries or damage caused by or during the installation of this product.
MADE IN U.S.A.
FOLLOW THESE INSTRUCTIONS CAREFULLY TO ENSURE CORRECT FITMENT AND OPERATION
STEP 5
Make sure the adjuster body is threaded completely onto the knurled portion
of the adjuster, then insert the complete assembly into the rewall. Line up
the screw hole to the notch and reinstall screw.
STEP 6
STEP 6 (CONT.)
Reattach the cable to the quadrant assembly rst, then to the clutch fork. To
adjust the cable, simply twist the knurled adjuster either cw or ccw to loosen
or tighten cable.
To Previous Page
Loading...