BBK 15050 User Manual

UPDATED LAST: March 2019
WWW.BBKPERFORMANCE.COM
BBK PERFORMANCE LLC
3060 Performance Circle
Deland, FL 32724
For any questions, email us:
TECH@BBKPERFORMANCE.COM
IMPORTANT: All appropriate safety equipment and gear must be used during the installation of this or any BBK Performance products or any time you work on a vehicle.
BBK Performance accepts no responsibility for injuries or damage caused by or during the installation of this product.
MADE IN U.S.A.
INSTALLATION INSTRUCTIONS - INS067
FIREWALL CLUTCH
CABLE ADJUSTER
Part # 15050 // 1979 - 2004 Ford Mustang applications
SPECIAL TOOLS REQUIRED: None.
INSTALL TIME: Approximately 1 hour.
DIFFICULTY: Easy.

BBK 15050 Specifications

General

Brand	BBK
Model	15050
Category	Automobile Accessories
Language	English

Summary

Installation Instructions

Remove Clutch Cable from Quadrant Assembly

Working from under the dashboard, remove the clutch cable from the quadrant assembly.

Remove Cable Housing from Firewall

Working from under the hood, remove the sheetmetal screw attaching the clutch cable housing to the firewall.

Prepare Firewall Opening

Remove the rubber isolator from the clutch cable housing end and slide adjuster onto the firewall opening.

Install Adjuster into Firewall

Thread adjuster body completely onto knurled portion, insert into firewall, and align screw hole.

Reattach Cable and Adjust

Reattach cable to quadrant assembly and clutch fork. Twist adjuster to tighten or loosen cable.