2
SETTING THE TONE/PULSE SWITCH
1. If your home is equipped with a Touch-Tone dialing system, set the Tone/Pulse Switch to the Tone position.
2. If you have a rotary dialing system set the Tone/Pulse Switch to the Pulse position.
3. If you are unsure which system you have, set the Tone/Pulse Switch to the Tone position. Lift the Handset and dial
a telephone number when you get a dial tone. If the dial tone continues, move the Tone/Pulse Switch to the Pulse
position and dial a number again.
SETTING THE RINGER LO-HI SWITCH
The Ringer Hi/Lo Switch can be used to set the sound level of the unit ringer. Set the Ringer Hi/Lo Switch to the Hi
position for normal operation. Set the Ringer Hi/Lo Switch to the Lo position for lower sound.
ANSWERING A CALL
On hearing the ring tone, lift the HANDSET and preceed with conversation. At the end of conversation replace the
handset.
MAKEING A CALL
1. Lift the HANDSET and wait a dial tone. The In Use Indicator will light up.
2. Dial the telephone number you wish to call.
3. Replace the HANDSET as soon as you finish you conversation.
REDIAL BUTTON
1. If the number you dialed is busy or you want the last number to be dialed again, press the Hook Switch and
release for a new dial tone.
2. Press the Redial button and release.
3. The last called number will automatically be redialed.
To Next Page
Loading...