6
bcstrength.com | bcstrength.co.uk | bcstrength.com.au
ASSEMBLY
INSTRUCTIONS
STEP 4 (cont)
e) Repeat on the other side
f) Lightly tighten Bolts on both sides
STEP 5
a) Place Back Pad (Part F) onto Back Pad Bracket
(Part E) and align holes
b) Screw in Small Bolt with Small Washer (Part J, Part
K), repeating on all 4 holes
c) Fully tighten all Bolts to complete the assembly
DISCLAIMER
Warning: misuse of this equipment can result in severe injury or
even death. Your use of this equipment is done so at your own risk,
and you warrant that you are both fit and competent to undertake
physical activity and the use of this equipment. You assume all risks
and responsibilities for all damage, injury and death which may
occur during or following incorrect use of this equipment in any
matter whatsoever.
To Previous Page
Loading...