BCP L-Shaped Corner - Product Information and Safety; Important Safety Notices; Tools and Hardware; Parts Identification

| 3
TOOLS
HARDWARE
• Please do not exceed the weight limitations of this item.
• Do not stand on or use any part of this item as a step ladder.
• Firmly secure all bolts, screws and knobs before use.
• Reconfirm that all bolts, screws, and knobs are secure every 90 days.
• Fasten screws loosely during initial assembly. Do not firmly tighten the screws until the item is
completely assembled.
• Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
• Be aware that some parts are heavy and have sharp edges.
• If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made
and/or factory replacement parts are installed.
• Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
NOTICE
Please retain these instructions for future reference.
PARTS
A
1 PC
SHORT TABLETOP
1 PC 1 PC
LONG TABLETOP
1
2
SHORT TABLE
LEFT LEG
3
FLAT HEAD
SCREWDRIVER
A
31 PCS
M6 x 38mm
CAM BOLT
M4 x 14mm
SCREW
B
4 PCS
FOOT
C
10 PCS
CAM LOCK
D
31 PCS
UP TO 1 HR.
ASSEMBLY
2 PERSON
ASSEMBLY
50 LBS
CAPACITY
LBS