BCP SKY4313 - User Manual

Questions and Answers

T
tyler88Aug 19, 2025
Why are my dishes not clean in my BCP SKY4313 Dishwasher?
- M
  Matthew AndrewsAug 19, 2025
  Your dishes may not be getting clean in your BCP Dishwasher due to several reasons: the items are not loaded correctly, the selected washing program isn't powerful enough, not enough detergent was used, items are blocking the spray arms, or the filters and nozzles are blocked. To fix this, rearrange the items, select a more appropriate washing program, use more detergent, ensure the spray arms can rotate freely by rearranging items, and clean the filters and spray arm nozzles.
W
William WashingtonAug 21, 2025
What to do if my BCP Dishwasher is not starting?
- M
  Mary HeathAug 21, 2025
  If your BCP Dishwasher isn't starting, it might not be properly plugged in. Ensure it is. Also, check for a blown fuse or tripped circuit breaker and replace the fuse or reset the breaker if necessary. Lastly, make sure the door is fully closed.
D
Donna GarciaAug 23, 2025
How to fix E4 error on BCP SKY4313?
- L
  Linda SanchezAug 23, 2025
  The E4 error on your BCP Dishwasher indicates an overflow, potentially due to a leak, overfilling, or improper soap. You should clean up the leak and then restart the operation.
D
Diana GallowayAug 26, 2025
What to do if BCP SKY4313 Dishwasher doesn't pump out water?
- S
  sgeorgeAug 26, 2025
  If your BCP Dishwasher isn't pumping out water, the drain hose might be kinked. Straighten it. Also, the filter might be blocked, so clean it. Lastly, the sink could be clogged; unclog it and ensure it drains well.
M
megancordovaAug 28, 2025
Why are my dishes not drying completely in my BCP SKY4313?
- G
  Gregory YoungAug 28, 2025
  If items are not drying completely in your BCP Dishwasher, it could be due to improper loading, not enough rinse aid, removing items too soon, using a non-optimal washing program, or using items with a low-quality coating. Try rearranging the items, refilling the rinse aid dispenser, opening the door and letting items cool before removing them, selecting a longer washing program with a higher temperature, or avoiding the use of items with low-quality coatings.
E
Ethan HayesAug 30, 2025
How to fix E1 error on BCP Dishwasher?
- R
  richardbrownAug 30, 2025
  The E1 error on your BCP Dishwasher indicates a long inlet time, which can occur if the faucet is closed, water intake is restricted, or water pressure is too low. Make sure the water supply is open and that the water pressure is adequate.
S
Stephen WilsonSep 1, 2025
Why is there soap suds in my BCP Dishwasher?
- M
  Melissa RobinsonSep 1, 2025
  If you see soap suds in your BCP Dishwasher, it's likely due to using an improper detergent. Only use the specified dishwasher detergent. It could also be from spilled rinse aid; clean any spilled rinse aid.
K
Kristy CooperSep 4, 2025
Why is my BCP SKY4313 making a knocking noise?
- J
  Jennifer WarnerSep 4, 2025
  A knocking or rattling noise during operation of your BCP Dishwasher can occur if the spray arm is knocking against an item or if items/utensils are not secure. Try rearranging the items to resolve this.
L
Leonard GeorgeSep 6, 2025
Why is there detergent left in the dispenser of my BCP SKY4313 Dishwasher?
- E
  englishsarahSep 6, 2025
  If detergent is left in the dispenser of your BCP Dishwasher, it's likely that items are blocking the dispenser. Rearrange the items to allow the dispenser to open freely.
S
Sandra KleinSep 8, 2025
Why is there a white film on the interior of my BCP SKY4313?
- S
  Susan Graham MDSep 9, 2025
  A white film on the interior of your BCP Dishwasher is likely caused by hard water minerals. Clean the interior with a sponge and mild detergent.