Slide a part 3 washer, part 5 spacer, and part C front wheel onto the front axle,
then secure it with another washer and part 4 nut.
Repeat on the other side. Snap a part D cap onto each wheel.
Slide a part A gear box onto the rear axle. Route the wires from the gear box through the body
of the vehicle and into the seat. Slide on a part B rear wheel and part 3 washer, then secure it
with a part 4 nut. Repeat on the other side.
x2
C
x6
3
REAR
FRONT
x2
B
x4
D
PRODUCT ASSEMBLY
1
x4
4
x2
A
x2
5
| 7
To Next Page
Loading...
