BCP SKY5271 - Seat, Backrest, and Windshield Assembly

PRODUCT ASSEMBLY
10
11
Attach the part I side mirror set (L/R) to the part H windshield with two part 2 screws.
Snap the windshield into the designated slots.
Insert the tabs on the part F seat into the designated slots and secure with two part 1 screws.
Slide the part G backrest into the back of the seat until it locks in place.
NOTE: Make sure to clear seatbelts out of the way during installation.
| 11
G
1
x2
F
H
I
RIGHT LEFT
2
x2