LESSON MODE
RECORD MODE
Octave Control
Under the lesson mode, you can perform octave adjustment from “-2” to “+2”, and the default
setting is 0. Press the [FUNCTION+] button + the [OCTAVE] “-” / “+” keys for octave adjustment
within ±2. For example, when adjusting octave to “-2”, the left zone will change to A0-C4 while
the right zone will change to C0#-C4.
Press the [FUNCTION+] button + [OCTAVE] “-” / “+” keys simultaneously to restore the default
setting.
NOTE: Octave control can only be enabled under the lesson mode.
Record
Press the [FUNCTION+] button + the [REC] key to enable the record mode. Press the
[FUNCTION+] button + the [REC] key again to disable the record mode.
Under the record mode, the metronome will be enabled automatically, and you can press any key
to start recording. Press the [FUNCTION+] button + the [TEMPO] key to adjust the tempo.
The piano can record 700 notes at maximum. When the storage memory is full, the record mode
will be disabled and the metronome will shut down automatically.
Play
Press the [FUNCTION+] button + the [PLAY] key to play what was recorded. During the playing
process, press the [FUNCTION+] button + the [PLAY] key again to stop playing.
REC
RECORD
PLAY
10 |
To Next Page
Loading...
