BCP SKY5588 - Recording and Rhythm Programming; Recording Audio; Rhythm Programming; Light-Up Key Teaching Methods

Follow
• Press “FOLLOW” to enable the follow teaching function. You can select the song to be learned by pressing the
number buttons or the “+/-” buttons.
• The keyboard will light up according to the main notes, indicating what notes should be played. The keyboard
will wait for you to play the correct notes before continuing.
• Press “START/STOP” or “FOLLOW” to stop the learning mode.
Ensemble
• Press “ENSEMBLE” to enable the ensemble teaching function. You can select the song to be learned by
pressing the number buttons or the “+/-” buttons.
• The keyboard will light up according to the main notes, indicating what notes should be played. The keyboard
will wait 3 seconds for you to play the correct notes (for the correct duration) before continuing.
• Press “START/STOP” or “ENSEMBLE” to stop the learning mode.
8 |
C C6 CM7 CaugCM(9) Cm
Cm6 Cm7
CmM7Cm(9) CmM7(9)
Cdim Cdim7 C7 Csus4
C1+2+5
Fingered Chord Fingering (C Key)
Note: the following diagram only shows fingered chord fingering for the key of C. Transpose the fingering
accordingly to play in other keys.
Recording
• Press the “REC” button to enable the recording function and “REC” will display on the screen. All notes played
while the recording function is active will be recorded. When the memory is full, “FUL” will display on the screen.
Press “REC” to end recording.
• Press the “PLAY” button to play back the recorded notes and “PLAY” will show on the display. After playback is
complete, recording mode will start again and “REC” will ap-pear on the display. You can record some more or
play back the notes again by pressing “PLAY” again.
• Press “START/STOP” or press “REC” again to disable the recording function and to clear the recorder.
Rhythm Programming
• Press “PROG” to enable rhythm programming, “PRG” will display on the screen. Keyboard percussion mode will
automatically activate. You can program custom rhythms from this mode.
• 32 percussive rhythms maximum can be programmed. “FUL” will show on the display when there is no more
memory for rhythms and the function will stop automatically.
• Press “PLAY” to playback the programming rhythm. Press “PLAY” again to stop the playback and enter
programming mode again.
• Press “START/STOP” or press “PROG” again to disable the programming function; all recorded rhythms will be
removed.
RECORDING AND RHYTHM PROGRAMMING
One-Key
• Press “ONE KEY” to enable the one-key teaching function. You can select the song to be learned by pressing
the number buttons or the “+/-” buttons.
• The keyboard will light up according to the main notes, indicating what notes should be played. The keyboard
will continue playing even if you make mistakes.
• After the song is finished, the same song will start again.
• Press “START/STOP” or “ONE KEY” to stop the learning mode.
LIGHT-UP KEY THREE-STEP INTELLIGENT TEACHING
AUTO BASS CHORD