Be Modern 1122 User Manual

200671_5
1
2kW Electric Heater c/w Thermostat Control
Fire Installation and operating instructions: Models 1122
User instruction for fan heater model: These instructions should be read carefully and retained for future reference
Important Notes
• This heater must not be located immediately below a fixed socket outlet.
• Do not use the heater in the immediate surrounds of a bath, a shower, or a swimming pool.
• Do not cover this heater, or obstruct the air inlet or outlet, otherwise there is a risk of overheating.
• The heater must be cooled down completely before any maintenance
• This heater must be fixed against a vertical surface.
• Under no circumstances should the heater be used as a free standing appliance.
• After unpacking, please make sure that the appliance is intact, with no signs of damage caused by
transport. If in doubt, do not use the appliance and contact the Service Centre.
• During normal operation this appliance will emit noise from the internal fan unit.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
• This appliance and its handset are not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning the use and dangers of the appliance and handset by a
person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance or handset
• Children of less than 3 years should be kept away unless continuously supervised. Children aged from 3
years and less than 8 years shall only switch on/off the appliance provided that it has been placed or
installed in its intended normal operating position and they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3
years and less than 8 years shall not plug in, regulate and clean the appliance or perform user
maintenance.
• Some parts of this product can become very hot and cause burns. Particular attention has to be given
where children and vulnerable people are in the vicinity.
• Do not use this appliance as a primary heat source
• Ensure that furniture, curtains and other combustible materials are positioned no closer that 1m from the
front of the fire.
• Do not stand the fire on the carpet – stand on a firm surface, which projects 250 mm (10 inches) beyond
the front of the fire and is free of dust and lint.
• If this fire is supplied through an extension cable, please ensure that it is the only appliance plugged into
the extension and that the instructions for the extension cable / reel are followed.
• CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut out, this appliance
must not be supplied through an external switching device, such as a timer, or connected to a circuit that
is regularly switched on and off by the utility.
• This appliance must be positioned so that the plug / fused spur is accessible
• In the event of a fault please disconnect the fire from the mains supply
• Warning: This appliance must be earthed.
The wires in the mains lead connected to this appliance are coloured in accordance with the following code:
GREEN and YELLOW Earth
BLUE
Neutral
BROWN Live
As the colour of the wires in the mains lead of this appliance may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked
with the letter E or by the earth symbol or coloured Green or Green and Yellow. The wire which is coloured
Blue must be connected to the terminal which is marked with the letter N or coloured Black. The wire which is
coloured Brown must be connected to the terminal which is marked with letter L or coloured Red.

Be Modern 1122 Specifications

General

Brand	Be Modern
Model	1122
Category	Electric Heater
Language	English

Summary

Important Notes

Heater Placement and Usage Restrictions

Crucial safety warnings regarding heater location, covering, and usage as a free-standing unit.

Maintenance and Cord Safety

Instructions for cooling the heater before maintenance and replacing a damaged supply cord.

Child Supervision and Use

Guidelines for child supervision and safe operation of the appliance, with age-specific restrictions.

Fire Safety Precautions

Safety advice on keeping combustibles away, proper fire placement, and extension cable usage.

Electrical Safety and Earthing

Critical electrical safety instructions, including thermal cut-out, accessible plug, and mandatory earthing.

Preparation for Use and Installation

Fuse Check and Supply Voltage

Ensure supply voltage matches appliance details and check the 13amp fuse for safety.

Fire Fitting Instructions

Detailed steps for fitting the fire, including screw placement, power connection, and chimney considerations.

Fixing Bracket Fitment (Marble Fireplaces Only)

Instructions for fitting a spacer bracket on marble fireplaces, involving screws and sliding.

Fire Fitment

Steps for physically installing the fire, connecting to mains, and ensuring it's seated correctly.

Thermostat and Operation

Thermostat Operation and Setting

Guide on using the thermostat to control heat output and maintain room temperature.

Switch Functions

Details on operating the switches for the lamp and the two heat settings of the fan heater.

Safety Thermal Cut-Out Reset

Steps to reset the Electronic Safety (E.S.) Control after it has switched off due to overheating.

Maintenance and Cleaning

Guidance on cleaning the appliance exterior and fan grille, and fuel bed removal.

Coal Bed Removal

Instructions for safely removing and refitting the one-piece removable fuel bed.

No Light Effect Troubleshooting

Troubleshooting steps for when the light effect is not working, including LED and fuse checks.

Electric Fire Guarantee and Compliance

Twelve Month Guarantee Terms

Explains the terms of the twelve-month guarantee, including coverage and exclusions.

Proof of Purchase Requirement

States that proof of purchase must be retained by the purchaser for the guarantee to be valid.

Guarantee Exclusions

Lists conditions and damages that are not covered by the twelve-month guarantee.

Guarantee Service and Statutory Rights

Details how to obtain service and confirms the guarantee does not affect statutory consumer rights.

Compliance and Disposal Information

Fire compliance with safety standards and guidance on proper disposal of waste electrical products.