Be Modern BM-05XXX1 User Manual

USER INSTRUCTIONS
INSTALLATION INSTRUCTIONS
SERVICE INSTRUCTIONS
It is a regulation that these instructions be handed to the customer after installation is complete. It is
also the responsibility of the installation engineer to ensure that the customer is able to fully operate
the appliance and is aware of any cleaning or maintenance requirements.
FULL DEPTH HE GAS FIRE
Model numbers: BM-05XXX1 MANUAL for use on Natural Gas (G20) at a supply pressure of 20 mbar in GB / I.E.
Model numbers: BM-05XXX2 SLIDE for use on Natural Gas (G20) at a supply pressure of 20 mbar in GB / I.E.
(XXX denotes Fret Type, Fuel Bed Type & Trim Type)
P-XX1541 ISSUE1

Be Modern BM-05XXX1 Specifications

General

Category	Indoor Fireplace
Model	BM-05XXX1
Power Source	Electric
Adjustable Thermostat	Yes
Remote Control	Yes
Overheat Protection	Yes
Weight	15 kg
Color	Black
Flame Effect	LED
Material	Metal, Glass

Summary

Regulatory Information and Installation Requirements

Gas Supply and Compatibility

Checks gas type, pressure, and compatibility for installation.

Builder Opening and Chimney Requirements

Details requirements for builder openings and chimney specifications.

Flue Box and Flue Checks

Covers prefabricated flue box requirements and flue draw tests.

General Installation Safety and Warnings

Spillage Test Procedure

Describes the spillage test for combustion product clearance.

Siting the Appliance

Fireplace Opening Dimensions

Specifies required dimensions for the fireplace opening.

Installation into Brick Chimney

Details depth and debris collection for brick chimneys.

Installation into Prefabricated Flue Box

Outlines requirements for prefabricated twin wall metal flue boxes.

Fixing the Appliance

Cable Fixing System Installation

Spillage Monitoring System Function

Front Glass Panel Management

Removal of Front Glass Panel

Installation of Front Glass Panel

Connecting the Appliance to the Gas Supply

Gas Supply Connection Procedure

Details connecting the gas supply using copper tubing.

Pilot Ignition and Pressure Testing

Guides on pilot ignition, manual/slide controls, and pressure tests.

Combustion Product Clearance Test

Completing the Installation

Customer Information and Demonstrations

Removal and Replacement of Gas Components

Manual and Slide Control Valve Servicing

Pilot Assembly and Injector Replacement

Operating Instructions

Manual Control Operation Guide

Step-by-step guide for manual control operation.

Slide Control Operation Guide

Step-by-step guide for slide control operation.

Pilot Ignition Troubleshooting