BE QUIET! STRAIGHT POWER 10

Need help?

Do you have a question about the BE QUIET! STRAIGHT POWER 10 and is the answer not in the manual?

Summary

Safety Instructions

Safety Functions

OCP (Over Current Protection)

Automatically switches off the power supply if the load on individual circuits exceeds the specified limit.

UVP (Undervoltage Protection)

Automatically switches off the power supply if the voltage on the circuits drops below a certain limit.

OVP (Overvoltage Protection)

Deactivates the power supply if the voltage in the circuits is too high.

SCP (Short Circuit Safeguard)

Fuse protects secondary circuits from physical defects and connected components.

OTP (Temperature Safeguard)

Automatically switches off the PSU if it overheats, requiring it to cool down.

OPP (Overload Protection)

Switches off the PSU if the total output exceeds the specified maximum load.

Troubleshooting

Frequent Problems

Inaccurate BIOS Voltage Readings

Inadequate PSU for Graphics Card

Technical Data

Label Specifications

Displays AC input, DC output, max current, and max combined power for different models.

Voltage Regulation Details

Details voltage regulation tolerance and maximum ripple/noise for each DC output.

Operating Conditions

Minimal Load Requirements

Rail Splittings and Connections

Physical Dimensions

ATX and 12 V Connector Pinout

Details pin assignments and wire colors for ATX and 12V power connectors.

PCI Express VGA Connector Pinout

SATA Power Connector Pinout

Peripheral & FDD Power Connector Pinout

Connectivity and Cable Lengths (700 W)

Connectivity and Cable Lengths (600 W)

Connectivity and Cable Lengths (500 W)

Connectivity and Cable Lengths (400 W)