8
OPERATION OF THE SPRAYER
ATTENTION: Please keep the safety lock in place when not in use to prevent from
switching the machine unintentionally. The LED light (shown below) can be used for
night time and low light areas.
LED light
ON/OFF
trigger
Safety lock
Extension nozzle
Changing
switch
Second
nozzle
First
nozzle
Quick
change
adapter
HOW TO USE THE EXTENSION NOZZLE
The extension nozzle is 40cm long, and also have to spray modes: Mist and Jet,
same as the first nozzle. Assemble it acording to above descriptions and adjust the
spray as intended. The extension nozzle can be rotated by 360 degrees making it
easier to get to hard to reach places.
EXTENSION NOZZLE ASSEMBLY
Press the copper nut same as above and then insert the extension nozzle in and lock it in place.
HOW TO CHANGE THE NOZZLES
The nozzles on this machine can be quickly changed. One can change the nozzle to extension
nozzle at any time. To detach the short nozzle: press the copper nut (quich change adapter) as
shown in below photo and then pull out the short nozzle.
To Next Page
Loading...