EasyManua.ls Logo

BE BE-3100PR - General Recommendations; Fuel Type; Gasoline;Alcohol Blends; Gasoline;Ether Blends

BE BE-3100PR
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
1. If fuel level is low, refill with unleaded automotive gasoline.
2. Check fuel gauge while filling. 
3. When using the generator for the first time or stopping due to the fuel 
    running out, pull the recoil handle several times after filling the tank.
General Recommendations
• Purchase gasoline in small quantities and store in clean, approved   
  containers. 
• To minimize gum deposits in your fuel system and to insure easy 
  starting, do not use gasoline left over from the previous season.
• Do not add oil to the gasoline.
• Consider adding fuel stabilizer before running or starting the generator.
Fuel Type
• For best results use only clean, fresh, unleaded gasoline with an octane 
  rating of 87 or higher.
Gasoline/Alcohol Blends
Gasohol (up to 10% ethyl alcohol, 90% unleaded gasoline by volume) is 
approved, as a fuel. Other gasoline/alcohol blends are not approved.
Gasoline/Ether Blends
Methyl Tertiary Butyl Ether (MTBE) and unleaded gasoline blends (up 
to a maximum of 15% MTBE by volume) are approved as a fuel. Other 
gasoline/ether blends are not approved.
pre-operation checklist
WARNING
DO NOT overfill the tank, leave room for the fuel to 
expand.
Check Component Parts
Check following items before starting engine:
1. Fuel leakage from fuel hose, etc.
2. Bolts and nuts for looseness.
3. Components for damage or breakage.
4. Generator not resting on or against any adjacent wiring.

Related product manuals