EasyManua.ls Logo

BE BE-3100PR - Transporting

BE BE-3100PR
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
maintenance
1. Check the fuel (gasoline), engine oil and air cleaner.
2. Start engine.
3. With appliance such as lighting activated, run the engine for over ten  
    minutes.
4. Check the following items:
• Engine running properly.
• Adequate output.
   • Engine switch normally operated.
• No leakage of engine oil and fuel (gasoline).
Transporting
When transporting the generator, make sure that the fuel (gasoline) 
should be drained from the tank.
WARNING
To prevent fuel spillage due to the vibration and impact, 
never transport the generator with fuel (gasoline) in the 
tank. Secure the tank cap.
To avoid the risk of the gasoline flammability, never leave 
the generator in an area exposed to direct sunlight or 
high temperatures for a long period time. 
Keep the fuel in an approved storage tank when transporting.
1. Turn the engine switch to the STOP position.
2. Drain the fuel from the tank.
3. Tighten the tank cap.
CAUTION
DO NOT place any heavy objects on the generator.
Select and place the generator in the proper position of the transport 
vehicle so that the generator will not move or fall down. Secure the 
generator if necessary.
transporting

Related product manuals